* chromatic dispersion and additional losses should be taken into account optical wavelength fiber output receiver loss conn 865 1310 1550 type mode suffix type power sensitivity budget range* type ? led mm l1 50 /125 -13 dbm -20 dbm 7 db 1 km st ? 62.5/125 -10 dbm -20 dbm 10 db 2 km st ? laser sm l2 09/125 -8 dbm -20 dbm 12 db 5 km fc/upc three-fiber 175 mhz rgb system for ultra high resolution remote displays the RGB-9130 is a amplitude modulated (am), led- or laser-based rgb video transmission system, with sync accepted on all on three channels. it is ideal for the extension of any high resolution video signal such as a cad / cam graphics workstation. units come with a built-in automatic gain control (agc) to maintain constant video output for each color, and a status indicator for power on. system design all units come in a small module or insert card version. the cards can be inserted into our 18 slot, 19" rack- mountable card cage (cc-18), or one of our smaller desk top card racks (dtcr series). the desk top card racks can handle one, two, four, or seven cards, allowing for greater flexibility and future expansion. they can sit on a flat surface as a larger stand alone unit, or can be surface mounted with the flanges provided. each one of our card housings operates with an appropriate power supply. the regulated switching power supply has short circuit protection, and an input operating voltage of 85- 265 v ac . features ? ultra-high resolution (1792 x 1536) ? multimode operation over three fibers ? 175 mhz video bandwidth ? ideal for radar applications ? true dc restoration ? flat frequency response ? complies with rs-170, rs-170a & 343 eia standards ? no emi or rfi and no ground loops ? stand alone or rack mount ? ideal for cad/cam workstation extensions 800-867-8426 ? info@opticomm.com ? www.opticomm.com ? contact opticomm for custom requirements. RGB-9130 175 mhz hi-resolution rgb/video
video video in/out impedance 75 ? video in/out level 1 volt peak to peak, 0.7 volts without sync video bandwidth 10 hz to 175 mhz @ -3db grayscale linearity distortion < 2.0 % typical pixel intensity distortion < 2.0 typical linearity 1.1 % typical tilt 0.5 % typical maximun horizontal frequency 128 khz maximum refresh rate 120 khz signal to noise ratio >52 db using rs-250c standards @ 1 km connector type bnc general dimensions & weight stand alone (sa): 7.16? l x 5.21? w x 0.94? h 30 oz insert card (ic): 6.3? l x 0.8? w x 4.0? h 16 oz operating temperature -20 c to +70 c storage temperature -30 c to +85 c humidity 0 to 95% non-condensing operating voltage 12 v dc (200 ma) or 24 v ac (300ma) or 110/220 v ac vibration up to 5 g's shock up to 12 g's diagnostics status monitoring led indicator sample configuration emissions: fcc part 15, ices-003, as/nzs, 3548, en55022 immunity: envs0204, en61000-4-2,3,4,5,6,11 safety: ul1950, can/csa 22.2, no.950-95 made in the usa rgb/vga/dvi hi-res video transmission
|
